Modules on CloudBolt Documentation

Event Broker Subscriptions

Mon, 01 Jan 0001 00:00:00 +0000

The following Event Broker Subscriptions (EBS) are created during OneFuse Configuration.

Event Broker Subscription states

The list below represents the vRA Event State Names, in order of execution, for OneFuse Modules that may require an EBS trigger.

BuildingPreEarly
BuildingPreLate
ProvisionedPreEarly
ProvisionedPreLate

Resource: Machine Life Cycle Extensibility

MachineRequested

Subscription name	EBS priority	OneFuse module	EBS name
PRE	1000	Property Toolkit	`OneFuse_PropertyToolkit_Requested`
PRE	1150	Naming	`OneFuse_Provision_Naming`

BuildingPre

Subscription state	EBS priority	OneFuse module	EBS name
Early	10	Scripting	`OneFuse_Provision_Scripting_BuildingPreEarly`
Early	15	Ansible Tower	`OneFuse_Provision_AnsibleTower_BuildingPreEarly`
Early	25	Pluggable Module	`OneFuse_Provision_PluggableModule_BuildingPreEarly`
Early	1000	Property Toolkit	`OneFuse_PropertyToolkit_Building`
Early	1200	IPAM	`OneFuse_Provision_IPAM`
Early	1300	DNS	`OneFuse_Provision_DNS`
Early	1500	Microsoft Active Directory	`OneFuse_Provision_AD`
Late	2000	Scripting	`OneFuse_Provision_Scripting_BuildingPreLate`
Late	2005	Ansible Tower	`OneFuse_Provision_AnsibleTower_BuildingPreLate`
Late	2015	Pluggable Module	`OneFuse_Provision_PluggableModule_BuildingPreLate`

ProvisionedPre

Subscription state	EBS priority	OneFuse module	EBS name
Early	10	Scripting	`OneFuse_Provision_Scripting_ProvisionedPreEarly`
Early	15	Ansible Tower	`OneFuse_Provision_AnsibleTower_ProvisionedPreEarly`
Early	25	Pluggable Module	`OneFuse_Provision_PluggableModule_ProvisionedPreEarly`
Early	1000	Property Toolkit	`OneFuse_PropertyToolkit_Provisioned`
Early	1500	Microsoft Active Directory	`OneFuse_Move_OU_AD`
Early	1600	ServiceNow CMDB	`OneFuse_Provision_ServiceNow_CMDB`
Late	2000	Scripting	`OneFuse_Provision_Scripting_ProvisionedPreLate`
Late	2005	Ansible Tower	`OneFuse_Provision_AnsibleTower_ProvisionedPreLate`
Late	2015	Pluggable Module	`OneFuse_Provision_PluggableModule_ProvisionedPreEarly`

Reconfigure VM

EBS priority	OneFuse module	EBS name
1100	ServiceNow CMDB	`OneFuse_Update_ServiceNow_CMDB`

MachineDisposingPost

EBS priority	OneFuse module	EBS name
10	Scripting	`OneFuse_De-Provision_Scripting`
15	Ansible Tower	`OneFuse_De-Provision_AnsibleTower`
25	Pluggable Module	`OneFuse_De-Provision_PluggableModule`
1100	ServiceNow CMDB	`OneFuse_De-Provision_ServiceNow_CMDB`
1200	Microsoft Active Directory	`OneFuse_De-Provision_AD`
1300	DNS	`OneFuse_De-Provision_DNS`
1400	IPAM	`OneFuse_De-Provision_IPAM`
1500	Naming	`OneFuse_De-Provision_Naming`

Configure EBS timeouts

EBS Timeouts allow the user to set a time limit per EBS for communication between vRealize Automation and vRealize Orchestrator.

Properties list

Mon, 01 Jan 0001 00:00:00 +0000

The following vRA Properties need to exist on the vRA Blueprint to ensure the desired OneFuse Modules are called for the Deployment.

General use

Purpose: relate OneFuse Policy executions from different OneFuse Modules together with a Tracking ID

Property	Value format
`OneFuse_Tracking_Id`	A GUID (globally unique identifier) that links OneFuse Policy Executions and the resulting Managed Objects together for a given resource on a deployment. The first OneFuse Module Policy execution will populate this vRA property and it will be passed into other OneFuse Modules automatically. Learn more about OneFuse Tracking ID.

When a Tracking ID is not provided, a Tracking ID gets generated for the Policy execution.

Templating and Property Toolkit

Mon, 01 Jan 0001 00:00:00 +0000

To learn more, refer to Templating guide and Property Toolkit features.

Introduction

The OneFuse Property Toolkit (PTK) is the Swiss army knife of the OneFuse Platform.

PTK can be used to simplify configurations, define business logic as configuration, build simple logic or tackle the most complex problems. At face value, the PTK is meta-data that can be called upon offering simple name value pairs that can be used as a reference for decision making. In its most powerful form, it can contain logic, decision trees, platform abstractions, and much more.

Ansible Tower

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to Ansible Tower.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse Ansible Tower Policies to run for this Blueprint.
Determine when to run each OneFuse Ansible Tower Policy for the deployment provisioning lifecycle with vRA’s EBS'.
Update the Blueprint to add in necessary vRA Properties to invoke OneFuse Ansible Tower Policies.
Deploy the Blueprint to provision a vRA Deployment and run Provision Job Template(s).
Destroy the vRA Deployment to run Deprovision Job Template(s), if any.

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA Properties

The following vRA Properties need to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

DNS

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to DNS.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse DNS Policies to run for this Blueprint.
Update the Blueprint to add in the necessary vRA Properties to invoke a OneFuse DNS Policy.
Deploy the Blueprint to provision a vRA Deployment and register DNS Record(s).
Destroy the vRA Deployment to remove the DNS Record(s) for the destroyed resource(s).

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA Property

The following vRA Property needs to be added Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

IPAM

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to IPAM.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse IPAM Policies to run for this Blueprint.
Update the Blueprint to add in the necessary vRA Properties to invoke a OneFuse IPAM Policy.
Deploy the Blueprint to provision a vRA Deployment and reserve IP Address(es).
Destroy the vRA Deployment to remove the IP Address(es) for the destroyed resource(s).

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA property

The following vRA Property needs to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

Microsoft Active Directory

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to Microsoft Active Directory.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse Microsoft Active Directory Policy to run for this Blueprint.
Update the Blueprint to add in the necessary vRA Property to invoke a OneFuse Microsoft Active Directory Policy.
Deploy the Blueprint to provision a vRA Deployment and create a computer account in Microsoft Active Directory.
Destroy the vRA Deployment to remove the computer account from Microsoft Active Directory.

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA property

The following vRA Property needs to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

Naming

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to Naming.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse Naming Policy to run for this Blueprint.
Update the Blueprint to add in the necessary vRA Property to invoke a OneFuse Naming Policy.
Deploy the Blueprint to provision a vRA Deployment and generate a name.
Destroy the vRA Deployment to destroy the vRA Deployment and name.

Update the Blueprint

Log in to the vRA Tenant.
Select the Design tab from the top menu bar.
Select the Blueprints tab from the left menu.
Edit the Blueprint and perform the below.

Add in necessary vRA Property

The following vRA Property needs to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

Pluggable modules

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse feature, refer to Pluggable modules.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse Pluggable Module Policies to run for this Blueprint.
Determine when to run each OneFuse Pluggable Module Policy for the deployment provisioning lifecycle with vRA’s EBS'.
Update the Blueprint to add in necessary vRA Properties to invoke OneFuse Pluggable Module Policies.
Deploy the Blueprint to provision a vRA Deployment and run provisioning scenarios for the Pluggable Module Policy.
Destroy the vRA Deployment to run deprovision for the Pluggable Module Policy, if any.

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA Properties

The following vRA Properties need to be added Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

Scripting

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to Scripting.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse Scripting Policies to run for this Blueprint.
Determine when to run each OneFuse Scripting Policy for the deployment provisioning lifecycle with vRA’s EBS'.
Update the Blueprint to add in necessary vRA Properties to invoke OneFuse Scripting Policies.
Deploy the Blueprint to provision a vRA Deployment and run Provision Script(s).
Destroy the vRA Deployment to run Deprovision Script(s), if any.

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA Properties

The following vRA Properties need to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.

ServiceNow CMDB

Mon, 01 Jan 0001 00:00:00 +0000

To learn more about this OneFuse module, refer to ServiceNow CMDB.

Prerequisites

Configure OneFuse Property Set(s) and OneFuse Module Policies.
Run OneFuse Configuration per vRA Tenant.
Review the OneFuse Modules overview for vRealize Automation 7.6.
Create a new vRA Blueprint (if none exist) or determine which existing Blueprint(s) will utilize this OneFuse Module.
- Resource: Designing Machine Blueprints

Configure the Blueprint

Know the name of the OneFuse Endpoint created via OneFuse Configuration.
Determine which OneFuse ServiceNow CMDB Policies to run for this Blueprint.
Update the Blueprint to add in necessary vRA Properties to invoke OneFuse ServiceNow CMDB Policies.
Deploy the Blueprint to provision a vRA Deployment and create ServiceNow CMDB Configuration Item(s) and run the Provision IRE Template.
Performing specific Day2 actions on the vRA Deployment will update the ServiceNow CMDB CI(s) accordingly and run the Update IRE Template.
Destroy the vRA Deployment to update the ServiceNow CMDB CI(s) with the specified deprovision status and IRE Template.

Update the Blueprint

Log in to the vRA Tenant
Select the Design tab from the top menu bar
Select the Blueprints tab from the left menu
Edit the Blueprint and perform the below:

Add in necessary vRA Properties

The following vRA Properties need to be added to the Blueprint’s Properties > Custom Properties section under the Resource(s) of interest.